Wedge Bolt
Wedge Bolts are the most common hardware item used to make connections while using the SurePly System. Two Wedge Bolts make up a set and may be used in both vertical and horizontal slots. One Wedge Bolt passes through the side rail slot and the other is dropped in the rectangular slot of the first Wedge Bolt, then hammered tight. Wedge Bolt connections should be tight, but it is not necessary to over-tighten. Doing so cause damage the forms or hardware, making stripping difficult.
Long Bolt
The Long Bolt is similar in design to the standard Wedge Bolt. Its application differs only in that it allows for a smaller steel filler to be placed between two panels. The added length of the Long Bolt allows it to pass from one form through the filler and through the adjacent form with adequate room to lock the bolt in place by use of a regular Wedge Bolt.
“S” Wedge
The “S” Wedge is a multi-purpose wedge used to secure Ply-Lag ends or other similarly slotted hardware items to the steel side rails.
